Linear RF Power Amplifier 2.0 GHz - 2.5 GHz

3 Watt Output (linear average)

Parameter Specification
P1dB +34dBm typ, 8MHz COFDM
ACPR -32dBc typ, 8MHz COFDM
EVM 1.5% typ, 8MHz COFDM
Gain 15dB typ (factory adjustable)
+/-1dB over conditions
Gain Flatness +/-0.5dB max
Input Power +20dBm typ +3dB overdrive capability
Operating Bandwidth Up to 500MHz instantaneous bandwidth
Non-Harmonic > 60dBc typ
Spurious Rejection  
I/O Impedance 50Ω, >10dB return loss
Supply Voltage 12-30VDC at connector
Power Consumption 30W max
Protection Capabilities Short and open circuit
Reverse voltage
Low output power warning
Connectors RF: SMA-F standard
DC: Amphenol PTO, 4-pin
Fan: Hirose 4-pin
Operating Temperature -15 to +60C, baseplate
Mechanical Dimensions 6.7 x 4.8 x 1.3 amp
6.7 x 4.8 x 3.2 with heatsink

Typical Features

  • Designed for Digital Modulation COFDM, QPSK, QAM, CW
  • Ultra-Linear or Saturated Operation
  • High Efficiency for low DC power consumption and low heat generation
  • Operating Gain up to 24dB (Factory Set)
  • Open and Short Protection on RF Ports
  • 12-30VDC Power Supply Range
  • Reverse Polarity Protection
  • RF Mute Control
  • Low Output Power Warning Signal
  • Digitally Controlled Standby Mode
  • Status Indicator LIst (green/red)
  • Rugged Packaging

Typical Options

  • Integrated Heat Sink and Fan
  • RF Output Automatic Level Control
  • Water Resistant, Sealed Enclosure
  • Type N or TNC RF connectors DB-9 for DC
  • Custom Feed Lines and other Accessories

Linear RF Power Amplifier 2.0 GHz - 2.5 GHz

5 Watt Output (linear average)

Parameter Specification
P1dB +37dBm typ, 8MHz COFDM
ACPR -30dBc typ, 8MHz COFDM
EVM 3% typ, 8MHz COFDM
Gain 17dB typ (factory adjustable)
+/-1dB over conditions
Gain Flatness +/-0.5dB max
Input Power +20dBm typ +3dB overdrive capability
Operating Bandwidth Up to 500MHz instantaneous bandwidth
Non-Harmonic > 60dBc typ
Spurious Rejection  
I/O Impedance 50Ω, >10dB return loss
Supply Voltage 12-30VDC at connector
Power Consumption 55W max
Protection Capabilities Short and open circuit
Reverse voltage
Low output power warning
Connectors RF: SMA-F standard
DC: Amphenol PTO, 4-pin
Fan: Hirose 4-pin
Operating Temperature -15 to +60C, baseplate
Mechanical Dimensions 6.7 x 4.8 x 1.3 amp
6.7 x 4.8 x 3.2 with heatsink

Typical Features

  • Designed for Digital Modulation COFDM, QPSK, QAM, CW
  • Ultra-Linear or Saturated Operation
  • High Efficiency for low DC power consumption and low heat generation
  • Operating Gain up to 24dB (Factory Set)
  • Open and Short Protection on RF Ports
  • 12-30VDC Power Supply Range
  • Reverse Polarity Protection
  • RF Mute Control
  • Low Output Power Warning Signal
  • Digitally Controlled Standby Mode
  • Status Indicator LIst (green/red)
  • Rugged Packaging

Typical Options

  • Integrated Heat Sink and Fan
  • RF Output Automatic Level Control
  • Water Resistant, Sealed Enclosure
  • Type N or TNC RF connectors DB-9 for DC
  • Custom Feed Lines and other Accessories